POLYAMIDE AREA DESTROYED GUIDE

Professional Carpet Cleaning Guide – Intensive Treatment for Severely Damaged Polyamide Carpets

Step 1: Pre-Vacuuming

• Thoroughly pre-vacuum the carpet to remove loose dirt and debris.

Step 2: Prepare Pre-Spray Solution

• Mix WS Hybrid Pre-Spray at 60ml per litre of water.

• Ensure the solution is fully blended before use.

Step 3: Apply Pre-Spray

• Apply a heavy, even coat of pre-spray using overlapping passes.

• Allow the solution to dwell for 15 minutes, during which it will break down soils and deodorise the carpet.

Step 4: Agitation

• After dwell time, use mechanical scrubbing methods to thoroughly agitate and lift embedded dirt from the carpet fibres.

Step 5: Rinse Extraction

• Prepare your rinse solution by mixing WS High Power WS Neutraliser (Acidic Rinse) at 30ml per 10 litres of clean water.

• Rinse extract the carpet slowly and methodically using your extraction wand.

Tip: For every wet pass, follow with at least seven dry passes.
Maintain uniform, straight wand passes — avoid zig-zagging to prevent pile distortion or “shark’s teeth,” which can become permanent in polyamide carpets.

Step 6: Spot Treatment

• Any remaining stains can be treated using a suitable spot cleaning product.

• Refer to the Spotting Guide for product selection and technique.

Step 7: Protective Coating

• Apply WS Advanced Fabric Stain Protection at a 1:1 dilution to create a long-lasting dirt and hydrophobic barrier.

• Application can be done wet or dry depending on your method and equipment.