INDUSTRIAL SYNTHETIC CARPETS WITH GREASE GUIDE

Professional Carpet Cleaning Guide – High-Performance Pre-Spray for Synthetic Carpets

Step 1: Prepare Pre-Spray Solution

• Mix High Performance Pre-Spray at 250ml per litre of water.

Step 2: Apply Pre-Spray

• Apply a heavy amount of pre-spray to the carpet using overlapping passes.

• Allow the solution to dwell for 15 minutes, during which it will break down soils.

Step 3: Agitation (Optional)

• After dwell time, manual or mechanical scrubbing methods can be used to further agitate the carpet fibres.

• This step is not always necessary, depending on the level of soiling.

Step 4: Rinse Extraction

• Prepare your rinse solution by mixing High Performance Rinse at 30ml per 10 litres of clean water.

• Rinse extract the carpet slowly and methodically using your cleaning wand.

Tip: For every wet pass, follow with at least two dry passes.
On polypropylene and polyester carpets, zig-zagging or “shark’s teeth” will not permanently disrupt the pile, but maintain a uniform pass pattern for a professional finish.

Step 5: Deodorising (Optional)

• High Performance Pre-Spray does not deodorise.

• A deodoriser can be added to your rinse tank or lightly sprayed over the carpet at the end of the process.