SYNTHETIC CARPET WITH URINE SPOT CLEANING GUIDE

Professional Carpet Cleaning Guide – Spot Urine Neutralisation for Carpets

Equipment Required

• UV light, moisture metre, and water claw.

Step 1: Prepare Pre-Spray Solution

• Mix High Power Urine Neutraliser and Mattress Pre-Spray at spotter strength (1:1 or 1 litre per 1 litre).

Step 2: Apply Pre-Spray

• Apply a small amount of the solution to the affected area only.

• Leave to dwell for 15 minutes to neutralise urine at a molecular level.

Note: Some odour may remain from the underlay or surrounding materials.

Step 3: Rinse Extraction

• Prepare your rinse solution by mixing High Performance Rinse at 15ml per 10 litres of clean water.

• Rinse extract the treated area slowly and methodically using your cleaning wand.

Tip: For every wet pass, follow with at least two dry passes.
On polypropylene and polyester carpets, zig-zagging or “shark’s teeth” will not permanently disrupt the pile, but for a professional finish, maintain a uniform pass pattern.

Step 4: Flush Heavily Contaminated Areas

• Use a water claw if necessary to flush areas with high urine contamination.

Step 5: Deodorisation

• High Power Urine Neutraliser and Mattress Pre-Spray effectively deodorises carpet fibres.

• For enhanced odour control, a deodoriser may be added to the rinse tank or lightly sprayed over the carpet after extraction.

Step 6: Protective Coating

• To limit future contamination, apply WS Advanced Fabric Stain Protection at a 1:1 dilution.

• This provides a long-lasting dirt and hydrophobic barrier and can be applied wet or dry.