WOOL HEAVILY SOILED SPORTS BAR GUIDE

Step 1: Prepare Pre-Spray Solution

• Mix High Performance Pre-Spray at 120ml per litre of water.

• Ensure the solution is fully blended before application.

Step 2: Apply Pre-Spray

• Apply a heavy, even coat across the carpet using overlapping passes.

• Allow the solution to dwell for 15 minutes, during which it will break down soils and residues.

Step 3: Agitation (Optional)

• After dwell time, manual or mechanical scrubbing may be used to enhance cleaning.

• Agitation is not always necessary, depending on the level of soiling.

Step 4: Rinse Extraction

• Prepare your rinse solution by mixing High Performance Rinse at 30ml per 10 litres of clean water.

• Rinse extract the carpet slowly and methodically.

Important:
For every wet pass, follow with at least two dry passes.
Maintain uniform, straight passes to prevent pile distortion or “shark’s teeth,” which can become permanent on wool carpets.

Step 5: Spot Treatment

• Any remaining stains can be treated using a suitable spot cleaning product.

• Refer to the Spotting Guide for detailed instructions and product selection.

Step 6: Protective Coating

• To extend the life of the carpet, apply WS Advanced Fabric Stain Protection at a 1:1 dilution.

• This creates a long-lasting dirt and hydrophobic barrier and can be applied wet or dry depending on your method and equipment.