WOOL LAST RESORT RESTAURANT CLEANING GUIDE

Professional Carpet Cleaning Guide – High-Strength Treatment for Heavily Soiled Wool Carpets

This method is intended for heavily soiled or damaged wool carpets in commercial or industrial environments. It may cause irreversible fibre damage and should only be used when standard cleaning methods are insufficient.

Step 1: Prepare Pre-Spray Solution

• Mix High Performance Pre-Spray at 500ml per litre of water.

• Ensure the solution is fully blended before application.

Step 2: Apply Pre-Spray

• Apply a heavy, even coat of pre-spray to the carpet using overlapping passes.

Step 3: Dwell Time

• Allow the pre-spray to sit on the carpet for 15 minutes, during which it will break down soils and residues.

Step 4: Agitation

• Once the dwell period is complete, use manual or mechanical scrubbing methods to further loosen embedded dirt.

Step 5: Rinse Extraction

• Prepare your rinse solution by mixing High Performance Rinse at 60ml per 10 litres of clean water.

• Rinse extract the carpet carefully and methodically.

Tip:
For every wet pass, follow with at least two dry passes.
Maintain uniform, straight wand passes to prevent pile distortion or “shark’s teeth,” which can become permanent on wool carpets.

Step 6: Repeat as Necessary

• If soiling remains, repeat Steps 1–5 until the carpet is clean.

Step 7: Protective Coating

• To extend the life of the carpet, apply WS Advanced Fabric Stain Protection at a 1:1 dilution.

• This provides a long-lasting dirt and hydrophobic barrier and can be applied wet or dry.