WOOL DESTROYED RESTAURANT AREA GUIDE

Step 1: Prepare Pre-Spray Solution

• Mix High Performance Pre-Spray at 120ml per litre of water.

• Ensure the solution is fully blended before application.

Step 2: Apply Pre-Spray

• Apply a heavy, even coat of pre-spray across the carpet surface.

• Allow the solution to dwell for approximately 15 minutes to penetrate soils and stains.

Step 3: Agitation

• After dwell time, agitate the carpet fibres using a mechanical scrubbing tool such as a CRB or rotary machine.

• This helps to loosen and lift embedded soils and stains.

Step 4: Rinse Extraction

• Prepare your rinse solution by mixing High Power WS Neutraliser (Acidic Rinse) at 60ml per 10 litres of clean water.

• Rinse extract the carpet carefully and methodically, ensuring all chemical residues are removed.

Step 5: Spot Treatment (If Required)

• Any remaining stains can be treated using a suitable spot cleaning product.

Tip:
Work in uniform, straight passes during extraction. Avoid zig-zag movements to prevent pile distortion, especially on wool carpets.