WOOL EXTREMELY HEAVY GREASE SOILED AREA GUIDE

Important Note:

When dealing with grease contamination, multiple applications and mechanical scrubbing may be required to fully emulsify the grease before extraction.

Step 1: Prepare Pre-Spray Solution

• Mix WS Hybrid Pre-Spray at 30ml per litre of water.

• Ensure the solution is fully blended before use.

Step 2: Apply Pre-Spray

• Evenly apply the pre-spray to the carpet.

• Allow the solution to dwell for approximately 15 minutes to break down the grease.

Step 3: Agitation

• After dwell time, agitate the carpet fibres using a mechanical scrubbing tool such as a CRB or rotary machine.

• This step is essential for emulsifying grease and lifting it from the carpet fibres.

Step 4: Rinse Extraction

• Prepare your rinse solution by mixing WS High Power WS Neutraliser (Acidic Rinse) at 30ml per 10 litres of clean water in your extraction machine.

• Rinse extract the carpet carefully and methodically, ensuring all residues are removed.

Tip: For stubborn grease, additional pre-spray and agitation cycles may be required before final rinse extraction.